The Dahon Sling Sack - The simplest way to carry your Dahon Wobbegong A Prepare your Wobbegong A. Step 1. Turn the handlebars 180degrees and slide the seat post to the lowest position. Fold the pedals and protect the main tube of the bicycle with the protective cloth included with each bag. (see Fig. 1) B. B Pack the Wobbegong in the Sling Sack Step 1. Take the Sling sack out of its protective bag and unfold it. Step 2. Open the autolock zippers, the head and saddle straps. (Note: the zippers stay on the derailleur side of the bicycle. Step 3. Place the Sling Sack over the bike allowing the seat post/saddle to protrude from the upper bag opening. Secure the seat post/saddle strap to prevent the bag from dropping. This will allow you to handle the bag more easily when fitting the wheels into the bag. (See Fig. 4) Fig. 1 Step 2. Loosen the handlebar stem binder screws on the stem with a 5mm Allen wrench. (See Fig. 2) Fig. 4 Fig. 2 Step 3. Make sure the removed stem and handlebar are placed on the left (non-chain wheel) side of the bicycle. (See Fig. 3) Step 4. Fit the front wheel into the bag by placing the front flap on the tire and then rolling the bike forward. (See Fig. 5) Fig. 3 Fig. 5 ©2008 Dahon | www.dahon.com/support/manuals.htm Step 5. Fit the rear wheel into the bag by placing the rear bag flap on the tire and rolling the bike carefully backwards. Make sure that the flap does not interfere with the derailleur. (See Fig. 6) Step 7. Lower the side flap and zip the autolock zippers/ (Double check the pull tab of the zipper is in the "locked" position and attach the shoulder strap. (See Fig. 8) Fig. 8 Fig 6. Step 6. Place the supplied cover on the stem and place the stem/handlebar in the inside pocket of the Sling Sack. Secure the stem/ handlebar strap and the hand grip. (See Fig. 7) Fig. 7 ©2008 Dahon | www.dahon.com/support/manuals.htm ...